More Quiltmaker Scrap Squad Quilts



My
Finished Linkin' Log Quilt



For the Sept/Oct 11 Quiltmaker Magazine, the Scrap Squad was given the pattern called Linkin' Logs.

The original was designed and made by June Dudley, QM Editor-in-Chief, in oranges and greens with a black background.


I have long been a feed sack collector, but have trouble when it comes to cutting into the sack fabric.  I am really stingy with the feed sacks!!!!  I thought this might be just the pattern that could temp me to use a feed sack background.  In my collection, I found four like kind of patterned sacks from the 1940's that I thought could work.  So my theme became "Something Old, Something New".  The "old" would be the feed sacks and the "New" would be the different shades of reds and teals from my stash and the "stash enhancements" from Quiltmaker's Diane.

 

A good variety let me make each log from a different fabric

 Making the Z block:
Each block was made from 2 reds (a dark and a light), 2 teals(a dark and a light) and the background feed sack fabric.  Since I was going to make each round log a different fabric, I desided to cut and sew one row at a time which made it easier to keep up with the fabric changes.

The Z block can be constructed like a big 9-patch, building the corner, center and side units before putting the 9-patch together.

I always kept the color placement in the same position.  Looking at the center partial seam unit, the dark red at the 12 o'clock position, the light teal at the 3 O'clock position, the light red at the 6 O'clock position and the dark teal at the 9 O'clock position.





Note the color rotation of corner pieces to form 1/2 of log



All blocks are the same layout, just rotated as the quilt rows are built





 

Making the Y Block:

The Y block completes rounded logs on the  top row, the bottom row and side rows.

See all block sizes, cutting instruction and for the block rotation in the section called "Assembling the Quilt Top"in the Quiltmaker September/October 2011 magazine.

It is most helpful to use a design wall when building the rows.  Mine is a flannel backed, plastic table cloth.  Usually put on a king size bed, sometimes on the floor,  when laying out the blocks.  When I'm not using it, can be folded and the blocks will stay in place.  This photo was before the Y blocks were added to the right side.



 













Laying out blocks



Making the Half Square Triangles (HST)

My Linkin' Log is like the magazine pattern, except that I made the half-square triangles (HST) a little different.  I cut fabric squares 3" instead of 2 7/8".  Made the diagonal line across the back, sewed a 1/4" seam on each side of the line and cut into 2 pieces on the drawn line.  This is how mine is different.  My favorite tool for making these HST is the Quilt In A Day Triangle Trimmer.  The extra room on the 3" square makes the trimmed HST a perfect 2 1/2" square every time







Red dotted line on sewing line and trim



Adding Borders:

The first border is the background sack fabric, to make the logs look like they are floating.  The 2nd border is a narrow dark teal. The last wider border is teal and white stripe.

Linkin' Log Quilt with 3 borders added





 

The corners are different on this quilt.  They are OK, but not something that I will regularly make.

The quilt is ready to go to Glenda Wilkerson to be machine quilted.  I chose a teal thread for the quilting, and as I usually do for quilts that are to get quite a bit of use, had Glenda split the batting in half, which make a light weight quilt that is comfortable and washes well.

How I do my Quilt Bindings:
I cut the binding fabric into 2 1/4" strips, width of fabric, and then sew them into one long piece.  This quilt took 8 strips.  Fold the binding in half, wrong sides together. Press.

Quilt ready to sew on binding

With the quilt face up, using a walking foot on the sewing machine, stitch a 1/4" seam around the quilt.

Since the corners on this quilt are different, I wasn't sure how the mitered corners would work, but they came out OK.  Just sewed to1/4" from the corner, then turned the binding back, away from quilt, and then back on itself to start down the next side.  When turned, this will become a "mitered corner".

At the end, sew the 2 pieces of binding together to complete the binding.

Now the quilt is ready for a "trim"  Cut the batting and backing along the 1/4" seam on the top side of the quilt.  Be very careful not to make a snip or cut into the quilt. Fold the binding over the cut edge, pin and then hand stitch the binding to the backing.  Always use a thread the color of the binding and your stitches won't show.

Linkin' Log Quilt is now finished and ready to use.  This was a very fun pattern to make and I think has a lot of possibilities.

P.S.  I'm glad I used some of my feed sacks!

Other places to see different versions of this pattern:
Check out the other Quiltmaker Scrap Squad members Linkin Logs.  You can see them reviewed on Quilitmaker's blog, QuiltyPleasures by Diane Harris.

Scrap Squad Blogs:
Dionne
Kim
Pat
Ruthie
Jane
Carol
Linda



Quiltmaker's Scrap Squad Quilt for June

Quiltmaker's July-August magazine will be coming out this week.  The Scrap Squad's assignment for this magazine is designer Barbara Cline's SPINOUT.  This is a paper pieced pattern that uses two colors of fabric at a time to make a triangle block.  The various color combinations produce a great looking, contemporary, quilt by arranging the colors into the spokes of the Spinout.  The triangles are sewn into rows that are then sewn into an overall tessellation pattern.

Barbara's other patterns and work can be seen at her website or her blog.

Look for other Quiltmaker Scrap Squad Members Spinouts on their Blogs

Dionne

Jane

Ruthie

Kim

Linda

Pat

Carol

Starting June 2nd,Quiltmaker's QuiltyPleasures will be featuring each of the scrap squad's quillts

This is my version of SPINOUT, in a scrappy way, before it was quilted

How I Made my Spinout



Pattern Outline



First I copied the pattern outline, colored and numbered it with the pattern numbers 1 - 12.  This would tell me how the different color combinations should be laid out.



I eventually changed the yellow colors to browns







Browns & Greens



The next job was to select the fabrics to be used.  I choose browns, greens, salmon to brick reds, and a neutral for the background.



Greens, Reds & Neutrals



The pattern calls for 264 paper copies of the triangle foundations.  I purchased the lightest weight paper that would feed well through my ink jet printer (20 lb), printed the pages  and then rough cut the triangle patterns apart. 

 At first, I thought, using the guide for the 12 different combinations of Units 1 through 12, I could mark the colors and how many I would need of each color combination.  But, because later, I did not like the look of everything being very scrappy and the Sprinouts were not as crisp as I wanted them to be, I eventually started making all 6 spokes of the Spinout from one fabric and liked it much better

I made a pattern of each part of the triangle by adding an additional paper to the side that was cut in two.  This allowed my to determine how much fabric would be needed for pattern and pattern 2.



The fabric for the two correct colors are placed behind the paper pattern, leaving about 1/4" over the sewing line.  I usually would fold it back to check that enough fabric was behind the pattern piece.  Then I would stitch on the sewing line.

After the block is sewn, sprayed with starch and pressed, I would then trim the block accurately.

Note how the finished block has the color on the opposite side as is marked on the pattern front.  Because in paper piecing you always put your fabric back to the back of the pattern when sewing.  This will reverse how the pattern is printed, but allows you to always see the sewing line on top of the pattern.

Finished block will be opposide of pattern front

A group of trimmed blocks, ready to sort and start building the rows of the quilt

I sorted the different color combinations into groups

Then using a flannel backed table cloth for a design wall (on bed below), and  using the colored outline from the first step, I put the triangles together to make the Spinout pattern.

Next, the paper was removed and the Spinout triangles were laid out on the design wall (now on the floor).

Then I picked up the triangles,by row, pinned them together and sewed them into rows. 

 There are 12 rows in this throw.

I press all seams open.  This really helped in matching the points and distributed the fabric bulk evenly.

For the border, I choose a brick and black colored strip 1 1/2" for the inner border and a brick color , small black print 

 3 1/2" for the outer border.  I thought it needed something else, and found some very flat, black 1/4" braid in my stash.  I washed a test piece of the braid to check for colorfastness.  It passed fine, so I then sewed on the braid, by hand, over the seam between the two borders.

Choosing a backing was the next step for me.  As I thought about it, because I had so many left over triangle pieces, I desided that a Spinout Tic-Tac-Toe game would be a fun idea.  So instead of a one fabric backing, I pieced mine.

               First because I had some leftover neutral layer cake pieces that were 10" squares, that became the size for the tic-tac-toe board

Added a green border, then a brick red border around the center.  I then sewed some of the leftover triangles into rows to make the backing be longer.  And finally added a wider green and neutral border to make the backing large enough to cover the quilt top.

For the game pieces, I sewed one of the 'A" pattern pieces to a paper pieced Spinout triangle, right sides together,           leaving an opening at the bottom for turning.  Clipped the corners, turned and stuffed with fiber fill and slip stitched the opening closed.

I made 5 game pieces with red for the main color and 5 pieces with green for their main color. 
These represent the "X" and "O" for the game.
Then made a small bag with a drawstring to hold the game pieces so they would stay together

After the quilting, ready for a Spinout Tic-Tac-Toe game

I selected a brick colored thread for the quilting and a small swirly quilting pattern to be machine quilted.
My Spinout quilt was machine quilted by Glenda Wilkinson of the Fabric Shed.

I liked how the dark thread came out.  It I think it looked good on the backing too.

I really like how the quilt turned out, but while making it I sometimes felt that it was quite tedious.  The pattern was easy.  The only problem was, being so scrappy, it took me a lot of time to get the color/fabric changes right.  It could be that was because this is my first paper pieced quilt.  If it was made like the pattern calls for, only 4 fabrics, would make it go together  much easier. 

All said and done, I like my Spinout Quilt!





QuiltMaker Scrap Squad - Project 2

This is the 2nd project for the Quiltmaker Scrap Squad.

This pattern, Raspberry Dessert, was designed by Julie Herman of Jay Bird Quilts.  She is a very talented designer and has lots to look at on her web site.  It is definitely worth a look to see her patterns and the other things she is doing.  Julie is providing a FREE PATTERN giveaway at each of the Scrap Squad member's blog.  There are eight of us.

April 5, 2011  9:45 AM   WE  HAVE  A  WINNER!
Using the random generator at random.org, number 23 was selected from the 65 comments on my Raspberry Dessert.

                                       The WINNER IS:  Marcia Burt

Congratulations Marcia, I will be emailing you to get your mailing address so that Quiltmaker can mail you the Jay Bird Quilts pattern. 
Please respond within 48 hours (10AM April 7, 2011) or another winner will be selected.

Thank you all for the lovely comments you made.  I appreciate it very much.  Hope you will visit my blog again.  We, in the Scrap Squad, are all looking forward to our next project, which will be coming up soon.  Watch for the next "reveal date" at Quilty Pleasures
 See other Quiltmaker Scrap Squad member's blogs to check their winners
Dionne
Jane
Ruthie
Kim
Linda
Pat
Carol


Also, Quiltmaker is having a fabric giveaway on QUILTY  PLEASURES.
   Click on this link to go to their site for instructions on how to enter the Free Fabric giveaway.

There are also links to what is going on with the Quiltmaker Scrap Squad at QuiltersClubofAmerica
 Just click on "Groups" and you will see our logo.  To see pictures, click on "Media" and there is always conversations and comments.

                         Quiltmaker's Raspberry Dessert - Finished March 2011

This is my finished Raspberry Dessert   (called RAS)

I made my RAS in fruity colors for a light weight summer quilt.  The squares in the black & white border represent pieces of the dessert or cobbler.  The quilt is backed with a small checked black and white gingham.

The pattern used 2" strips and 3 1/2" squares.  I chose a dark for the center, then a medium and light color for the strips to go around the center square.

To organize my block making, I cut Post-It notes with the sizes and number of strips it would take from each color way to make two "Y" blocks and two "Z" blocks.  I then labeled them if they were to be cut from the dark, medium, light, or background strips.  This made chain piecing the blocks a breeze!

       This is how the Y & Z blocks went together to make a larger block.

When I laid out the blocks, I could see that I didn't like the way the yellow block looked.  There was not enough contrast in the center.

I un-sewed the center of the four "Y" and "Z" blocks and replaced them with a darker center and liked them much better.

This is the block that is used to set in the "on point" blocks.  I had never used a pieced set-in block like this before, but it went in very easy.

The block has to be trimmed to straighten the outside edge, after it has been set in.

Since those edges are on the bias, I sewed my first border piece on to help stabilize the edge before I trimmed it.

The 3 1/2" squares are framed with a 1 1/2" piece of border print to make the corners have a special look of "pieces of dessert".

A black & white gingham backing was added, quilted and a black binding finished the Raspberry Dessert just in time for a nice spring time nap!

April 5, 2011          Selected from a random drawing,

                              The Winner is:    MARCIA  BURT

            

To enter this giveaway, leave your comment at the bottom of this post by midnight, Monday, April 4th.

The pattern is provided by Julie Herman of Jay Birds Quilts.

All of the comments will be entered into a random drawing.
On Tuesday, April 5^th, a winner will be selected and the winner’s name will be posted here.  Come back and visit this post to see if you are the winner.  Good Luck to all of you!